Loading…
This project is a modern replacement for classic LCD displays in Sony MiniDisc portables. It uses an ATTiny1614 controller with a TPS61046 boost circuit for driving an SSD1306 OLED.
The protocol is documented here: https://github.com/MiniDisc-wiki/md-firmware/wiki/LCD-SPI-protocol-(NetMD-devices)
Confirmed to work with: MZ-N510, MZ-N520, MZ-N505. Should work on all Sony NetMD devices (non-himd), and most likely will work on older devices (the MZ-R700 uses the exact samedisplay protocol, I only haven't tested it).
Connect the OLED board to the SPI lines on the MD display board. VCC on the display board isn't stable enough, you should connect to a stable voltage line on the MD controller board (such as VCC for the remote, VCO1 on the MZ-N510).
Loading files…
No comments yet. Be the first to ask about this board.