Loading files…
[WARNING] Please read carefully this note before using this project. It contains important facts.
Content
DOP (Delivery Of Power) Module is a dc-dc stepdown module based on the XL4005 by XLSEMI.
DOP (Delivery Of Power) Module is published under the Creative Commons CC0 license. You can find a copy of the licence there : https://creativecommons.org/publicdomain/zero/1.0/legalcode
You can copy, modify, distribute and perform the work, even for commercial purposes, all without asking permission.
DOP (Delivery Of Power) Module is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
The 2K variable resistor seems discontinued. At least, it was unavailable at LCSC at time of ordering the first batch.
A selection for the big capacitors, the inductor, and the trimming potentiometer :
| Manufacturer | Mfr. No | Description |
|---|---|---|
| Rubycon | 50ZLJ470M12.5X16 | Aluminium Electrolytic Capacitors - Radial Leaded LOW IMPEDANCE ELECTROLYTIC CAPACITORS |
| Rubycon | 50YXJ470M12.5X20 | Aluminium Electrolytic Capacitors - Radial Leaded LOW IMPEDANCE ELECTROLYTIC CAPACITORS |
| KEMET | A759PY687M1HAAE026 | Aluminium Organic Polymer Capacitors 50Vol 680uF RAD 2KHr ESR=26 mOhms |
| Coilcraft | VER2923-333KL |
| Power Inductors - Leaded 33uH Shld 10% 26A 2.6mOhms |
| Coilcraft | AGP2923-333KL | Power Inductors - Leaded 33uH Shld 10% 26A 2.6mOhms AECQ2 |
| Bourns | 3214W-2-202E | Trimmer Resistors - SMD 4MM SQ MT CERMET TRIMMER SMD |
| Bourns | 3214W-1-202G | Trimmer Resistors - SMD 4MM SQ 2KOHMS 10% 5TURN |
| Bourns | 3214W-1-202E | Trimmer Resistors - SMD 4mm SQ 2K OHM |
DOP (Delivery Of Power) Module is made using Kicad 5.
Do not use DOP (Delivery Of Power) Module if this project is not suitable for your project.
To get the latest available work, one must clone the git repository, build and install the package.
git clone https://github.com/sporniket/dop-module-dc-stepdown-xl4005.git
Then, open the project with Kicad 5.
See the project issues page.
Use the project issues page.
No comments yet. Be the first to ask about this board.