Loading files…
An Arduino Uno–based water tank level monitor with automatic pump control, built and simulated in Wokwi, then converted into a full KiCad 10 PCB design.
The system uses an ultrasonic sensor to measure water level, displays the percentage on a 16x2 LCD, and switches a pump on/off through a relay — either automatically based on level thresholds, or manually via a pushbutton.
The HC-SR04 ultrasonic sensor is mounted facing down into the tank and measures the distance from itself to the water surface. That distance is converted into a fill percentage relative to a calibrated "empty tank" reference distance stored in EEPROM.
EEPROM address 0).| Condition | Action |
|---|---|
| Level < 30% | Pump turns ON |
| Level ≥ 95% | Pump turns OFF |
WATER LEVEL: <xx>%PUMP:<ON/OFF> <AUTO/MANUAL>Arduino_UNO_R3 footprint on this system, so the 3D preview/renders are shown without the Uno model in place. This is a visualization-only gap — the footprint, pin mapping, and board layout underneath it are unaffected.| Front | Back |
|---|---|
| Front | Back |
|---|---|
Srushti D Hebbar GitHub
This project is licensed under the MIT License. See the LICENSE file for the full license text.
No comments yet. Be the first to ask about this board.