Hardware projects tagged atmega328p

Flight controller PCB for a custom-built quadcopter based on the ATmega328 microcontroller.

MCU Datalogger — ATmega328P-based data logging PCB with DS1307 real-time clock, dual I²C EEPROM storage (24LC025 + 24LC1025), battery backup, UART/SPI/I²C breakout headers, and ICSP programming port. Designed in KiCad 10 on a 4-layer stackup. Includes full schematic, PCB layout, and Gerber files.

DIY Simple Arduino In-System-Programmer (Perf board USBasp clone)

Battery-powered ATmega328P data logger with RTC and dual EEPROM — designed in KiCad, optimized from 4-layer to 2-layer PCB.

A digital min/max thermometer.

The piece of hardware used in almost all modules in the boat of Zênite Solar Team on 2018.

Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.

Tachometer Module for CANBUS with ATmega328p

Expansion board for Atmega328p.

Open source stepper driver powered by atmega328p chip. First prototype designed for used in 3D printer.

ATMega Barebone PCB. Applicable for battery powered applications. Usable microcontrollers: ATTiny88, ATmega48A/PA, 88A/PA, 168A/PA, 328/P

The RedBoard Edge is a RedBoard that's been rebuilt around the idea that projects are eventually put into an enclosure to help clean up their look.

Hardware and software for irrigation control and monitoring

4-layer PCB datalogger designed in KiCad — ATmega328P with DS1337 RTC, I2C EEPROM, and UART/SPI/I2C breakouts

A custom-designed ATmega328P-based data logger PCB featuring dual I²C EEPROMs and a DS1337 real-time clock for reliable time-stamped data storage.

HALLO EYE

Módulo de Carregamento do Sistema da embarcação solar Guarapuvu II (Zênite Solar)

Ethernet base NTP clock panel driver

Voltage or Current Sensor Module for CANBUS with ATmega328p

Módulo de Interface do Controle da embarcação solar Guarapuvu II (Zênite Solar)

Módulo de voltímetro interligado ao CAN

This is a PCB for an atmega328 programmer

Мой диплом

ATmega-based RFID Door Lock