Hardware projects tagged rf
Open hardware projects tagged rf on BoardRepo. View schematics and PCBs in the browser and download the sources.
Projects
A 915MHz radio w/ temp sensor, pressure sensor, LED and ATMega328p
Breakout board for the CC2500 2.4GHz RF transceiver module
Breakout board for the A7139 433MHz RF transceiver module
LNA with SAW filter
LNA3030 is an in-line SMA Low Noise Amplifier with SAW filter
Breakout board for the XL7105-SY-B 2.4GHz RF transceiver module
Radio frequency prototype boards (based on MegawattKS' design)
ESP32 + STM32 + E28 Transmitter Controller PCB Custom two-layer KiCad transmitter-controller PCB integrating ESP32 DevKit, STM32 Bluepill, dual joystick inputs, E28 2.4 GHz RF module interface, RF regulator headers, power switch, and debug test points.
Hardware PCB Design for AVR-based Datalogger using KiCAD
LinHT - Linux-based, SDR handheld transceiver.
A professional 4-channel RF RCA switching system with specialized RX (114.475mm x 72.575mm) and TX (71.475mm x 70.575mm) units. Features Omron G5V-1 relays, Right-Angle RCA jacks, and MCP1640 boost converters for stable 5V operation from AA batteries. Designed in KiCad v10.0 with optimized bottom-layer component placement
low cost software radio platform
a Nordic nRF24L01+ neighbor
a quadruple 2.4 GHz ADF7242 transceiver neighbor for monitoring Bluetooth LE
IQ Modulator for 2M and 70cm from I2C and ALSA PCM Audio on Orange PI Zero (Estimated TX Power 500mW)
an RF power detecting neighbor
a TI CC1350 neighbor
an experimental SDR platform
Dual channel Arduino Nano milliwatt power meter for HF/VHF/UHF/SHF bands
Development of an SMA coaxial to microstrip transition using open source software (openEMS)
Custom Sub-GHz Transceiver Gateway
Custom STM32 RF board designed in KiCad.
Yet Another Radio Dongle
4 port eCal module