Hardware projects tagged stm32
Open hardware projects tagged stm32 on BoardRepo, the GitHub for hardware. View schematics and PCBs in the browser and download the sources.
Projects
STM32F407-based line-following robot with an IR sensor array, dual L293DDM motor drivers, 0.96" OLED display, Bluetooth 4.0 (JDY-30), MPU-6500 IMU, and onboard buck/boost power management. Designed in EasyEDA. Rev 1.0.
This board is a Bluetooth to PC audio bridge! It lets you connect devices such as consoles or phones to it via Bluetooth to transmit audio, and then the board sends the audio through to your PC headphones with a wired connection!! TLDR: It lets you pass audio through to your PC from external devices :D
Motor driver PCB
No description.
Brushless DC motor driver
Line Follower Robot powered by STM32F103C8T6 microcontroller, using TCRT5000 5-way sensors for line detection, HC-05 for Bluetooth communication, TB6612FNG motor driver, and N20 motors (1000 RPM). Implements PID control for precise line tracking and feedback. Features case 0 and case 1 logic to navigate predefined map patterns. Winner of Tire-d.
Miniature closed-loop controller for brushless DC motors
A TS100 USB-PD replacement PCB.
Datalogger board design with KiCad The design files are available and free to use. For Any project related question do not hesitate to message me.
the Evaluation Board base on ESP32-S3 with Xtensa® Dual-Core 32-bit LX7.
DDS function generator build around STM32 BluePill board
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
Small embedded dev board with an STM32H7 and a full J-link connector
Solar powered noise measuring business card
Firmware and Kicad project for my USB to UART/I2C/SPI converter
Leopold FC980C replacement keyboard controller
STM32 based development board design using KiCAD
PCB design Vario sensor
A soldering reflow hot plate based on STM32
PMSM/BLDC motor controller/driver PCBs
Renamed from esp32leddriver because it also contains code and PCBs for other MCUs
A Custom STM32 board that runs on a battery with MCP73831 and is easily programmable with USB thanks to the CP2102 USB-to-UART chip.
Open Wheather Station based on STM32
A DC-DC buck converter based on an STM32 Nucleo board
A portable UV exposure controller firmware. The project uses a modular architecture with persistent settings, preset storage in Flash, battery protection logic, and an encoder-driven OLED UI.