Loading files…
The APM is a monitoring tool to determine the exact power consumption of an AGP Graphics Card. It measures both power provided by the AGP slot as well as through external power sources via:
At the heart of APM is a custom AGP Riser card which consists mainly of an STM32F103C8T6 and three INA3221 power monitors.
It measures the voltages and currents of the AGP slot as well as of external power providers. Additionally there are two alternative inputs which can be used to measure any user-chosen external power rail as long as it is within specification.
The following power rails are being measured by the APM.
| Interface | Rail |
|---|---|
| AGP slot | 12V |
| AGP slot | 5V |
| AGP slot | 3.3V |
| AGP slot | VDDQ |
| External power | 12V (6Pin) |
| External power | 12V (4Pin) |
| External power | 5V (4Pin) |
| Alternative input | A |
| Alternative input | B |
Each rail can measure:
These resolution values have to be take with a grain of salt, since these are theoretical numbers. The 26V and 10A are the absolute maximum ratings and must not be exceeded at any time.
The APM uses an STM32F103C8T6 as its main processor. It serves as a USB interface providing fast access to the data provided by the INA3221.
The firmware is built using Platform.io and programmed via the 4 pin header on the board using STlink.
The monitoring software for APM is written in python and provides the following capabilities:
To see some values from measured graphics cards, see reference values
This project is provided as is. There is no support or warranty on any parts of it (this includes hardware design, firmware and software). Use it at your own risk.
The author will not be accountable for any damage or harm inflicted.
No comments yet. Be the first to ask about this board.