Loading files…
You can find full details and discussion on my blog.
This is an alternate electronics and firmware for David Kingsman's Split-Flap Display.
DEBUG 1
unitCount 12
NETWORKNAME "splitflap"
calOffsetUnit : an array of the offsets to move from hall sensor trigger to blank flap
FlapStep : an array containing the number of steps per stepper revolution (then divided by 45 flaps)
WIFI_SSID "mySSID"
WIFI_PWD "myPassword"
MY_NTP_SERVER "au.pool.ntp.org" // Set the best fitting NTP server (pool) for your location
MY_TZ "AEST-10AEDT,M10.1.0,M4.1.0/3" // Set your time zone from https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv
WORDNIKAPIKEY "" // Get your private key from https://developer.wordnik.com/
MINWORDLEN 9 // Specify minimum word length to fetch from Wordnik
WORDUPDATESPERHOUR 1 // Set number of word updates from https://wordnik.com per hour. 0 will disable, else use an integer that results in an exact number of minutes btw updates i.e. 1,2,3,4,5,6,10,12,15,20,30 or 60
This project makes extensive use of two libraries:
{
displaytext: "Display Text"
}
For example, you could use the request node within node-red:
Schematics for the Controller and Unit PCBs can be found under schematics.
Gerbers, Bill of materials and Kicad source files can be found under PCBs.
PCB mounting brackets can be found on Printables.
Also found there is my remixed unit frame. This is optional, as you could still use the original frames with the new electronics.
My unit frame requires an additional two M3*L3*D4 heat inserts for connecting to the adjacent unit.
front
rear
Plywood (3mm) files for laser cutting are in enclosure
Copyright (c) 2024 Malcolm Yeoman.
Electronics is released under CERN-OHL-P (Permissive) V2.
Firmware is released under the MIT License.
Documentation is licensed under a Creative Commons Attribution 4.0 International License.
No comments yet. Be the first to ask about this board.