BrowseBoardRepo

n2k_evo_autopilot_remote

Public

@titio72

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 24 files, ready to open in KiCad33 KB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip53 KBGerbers and drill zip: evo_ap48 KBPick and place (CSV)1016 BPick and place (CSV): evo_ap980 BPCB BOM CSV (PCB SVG)777 BPCB BOM CSV (PCB SVG: evo_ap)777 B
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)1.8 MB3D model (GLB): evo_ap1.6 MB
Browse all files

Share n2k_evo_autopilot_remote

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/titio72/n2k-evo-autopilot-remote

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

EvoAutoPilotRemote

RF remote for Raymarine EVO autopilots

The project uses a ESP32, a CAN adapter MCP2515 and a simple RF receiver to implement a remote command for Raymarine EVO Autopilots. The remote I've used are simple, cheap EV1527 four buttons 433Mhz that you can find for a few euros on Amazon, Ebay etc.

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.