Loading files…
The main function of the ATtiny is acting as a battery friendly low power co-processor for the ESP. A bit like the ULP low power co-processor of the ESP32, except with a lot more IO functions and program memory.
ATtiny and ESP combined use 22uA in sleep mode or even less when the ESP is switched off by the ATtiny with CS.
Usable on breadboard (ATtiny84: 9 rows high, leaves 2 rows empty and ATtiny16x4: 8 rows high) OR stand alone.
3 PCB designs: ATtiny84 or ATtiny16x4 or ATtinyx02
All components / features are optional:
The ATtiny wakes up the ESP every 10 minutes by pulling RST low and sends a counter and the supply voltage to it.
OTA for ESP program updates is activated for 20s when the I2C communication fails. This can be triggered by resetting the ESP by pulling the RST line low. Because the ATtiny is most of the time sleeping the I2C communication will fail.
There is a small chance that the ATtiny will reset the ESP during upload when the 10 minute interval is completed. You can prevent this by pulling the ATtiny RST low when using OTA, or just upload again.
No comments yet. Be the first to ask about this board.