Loading files…
[!IMPORTANT] July 26th was the date I submitted this keyboard for review, today on October 6th I noticed that I forgot to add the firmware (which would have been caught by a reviewer).
[!IMPORTANT] Made for Hackboard, which requires having made a macropad as part of Hackpad V2.
Here is my Hackpad V2 macropad: Wirepad
This is a 34-key ortholinear split keyboard with built-in wrist supports, one 0.91" OLED display on each half, and low-profile mechanical Cherry-MX type switches (Gateron). I use a TRRS cable to connect the two halves. The case is 3D printed and uses 5 M2 screws (four M2x12, one M2x4).
For the firmware I'm using KMK.
I created this keyboard as a replacement for my laptop's keyboard, which might fail soon. I wanted an ortholinear split keyboard with fewer keys that would fit the Engram keyboard layout. In the past I designed a similar keyboard with an 0.42" OLED display under each key (inspired by PolyKybd Split 72), but I lost that design due to an accidental mass file deletion that BTRFS couldn't recover.
| Main Schematic |
|---|
| Left LEDs | Right LEDs |
|---|---|
| Left Switches |
|---|
| Right Switches |
|---|
The gerber files can be found in
pcb/gerber
| Name | Sourcing | Category | Amount | Price (total including shipping) |
|---|---|---|---|---|
| Orpheus Pico | Hack Club | MCU | 2 | $0 |
| Gateron Low Profile Switch 2.0 Red | AliExpress | switches | 35 (set) | $15.85 |
| Transparent Keycaps with Black Bed | AliExpress | keycaps | 40 (4x 10 pcs set) | $17.55 |
| SK6812 MINI-E LED | AliExpress | misc | 100 (set) | $5.13 |
| 0.91" White OLED Display | AliExpress | misc | 2 | $3.61 |
| 1N4148 THT Diode | AliExpress | misc | 100 (set) | $1.98 |
| PJ-320A 3.5mm Female Jack Connector | AliExpress | misc | 20 (set) | $2.13 |
| M2x4 Hexagon Countersunk Head Screw with Nut | AliExpress | fasteners | 50 (set) | $1.75 |
| M2x12 Hexagon Countersunk Head Screw with Nut | AliExpress | fasteners | 50 (set) | $2.46 |
Switches & keycaps:
Fasteners: $4.21 total
Misc:
Misc total: $12.85
JLCPCB cost, if I were to order it myself: $30.04 total (for the entire keyboard, i.e. both halves)
No comments yet. Be the first to ask about this board.