Loading files…
This repository contains the firmware and documentation for the Design Innovation Lab's Formlabs Wash Sensor. This device is designed to monitor multiple Formlabs Wash units and visually alert when a wash has completed.
The device uses a distance sensor to measure the position of the wash basket. If the sensor detects the back wall, it assumes the machines are empty or currently working. If it detects an object (the basket/print) consistently, it illuminates a WS2812B LED strip to indicate presence and position, providing visual feedback in busy environments.
A custom PCB was designed to integrate the components neatly and flatly against the wall. The PCB files can be found in the kicad/ directory. It's simply mounted against the wall using double-sided tape. Nothing special about it, just better than a bunch of wires. Uses Osh Park design rules.
WALL_DISTANCE: The distance from the sensor to the back wall. Readings beyond this turn the system off.FIRST_LED_DISTANCE_OFFSET: Distance from the sensor to the first LED on the strip.SENSOR_DETECTION_OFFSET: Compensates for the sensor detecting the front edge of an object while the LEDs should represent the center.LED_SPACING: Physical distance between LED pixels.PRESENCE_TIMEOUT: Time an object must be consistently seen before LEDs turn on.FILTER_ALPHA: Smoothing factor. Lower is smoother but slower.HYSTERESIS_THRESHOLD: How far the object must move to shift the LED pixel.
No comments yet. Be the first to ask about this board.