Loading files…
Outdated and moved to https://github.com/Binary-Kitchen/SolderingTutorial/tree/master/Shrocket
Easy soldering kit for a music festival
Video: video/switch_on_front_and_back_side.webm
Prepare the parts
Add solder to the long pad of the bottom LED
Bend the legs of one LED to look like this
Solder one LED at the bottom. Solder the long leg to the long pad with the + sign
Should look like this
Add solder to the long pads of the 3 top LEDs
Solder the remaining 3 LEDs to the 3 pads on top.
Should look like this
Snip the excess legs
Should look like this
Clip the legs of the 3 top LEDs.
Bend the legs of the switch so they touch the table.
Solder one leg of the switch
Solder the other leg of the switch
Add solder to the left pad of the battery holder.
Solder the left leg of the battery holder
Finished with soldering
Add the battery. Careful: the left arms must go on top of the battery, and the longer right arms below.
It should look like this. Check again that the 2 small arms on the left side of the battery holder touch the battery from the top.
Finished with soldering
Switch it on and check if all LEDs light up.
They should switch from red to green
Add hot glue to the LEDs
Only a small drop
A bit of hot glue at the bottom LED
Finished. Now decorate the front side with glitter if you want to.
Animation Back side
Front side
No comments yet. Be the first to ask about this board.