Loading files…
A 4x4 matrix keypad PCB using 16 tactile push-button switches wired in a row/column matrix, broken out to a single 8-pin header for scanning by an external microcontroller.
| Switches | 16x KSC1131J (SMD tactile switch) |
| Layers | 2 |
| Interfaces | 8-pin matrix header (4 columns, 4 rows) |
| Revision | 0.1 |
| Status | In development |
This board implements a 4x4 tactile matrix keypad intended for use as an input peripheral for a microcontroller-based project. Sixteen SMD tactile switches (S1-S16) are arranged in a 4-row by 4-column grid and wired so the full keypad can be scanned using only 8 GPIO lines (4 column drives, 4 row reads) via a single in-line header. Four mounting holes are provided at the board corners for enclosure integration.
The board consists of a single functional block: the switch matrix itself. Sixteen KSC1131J tactile switches are arranged in four rows of four. Each switch bridges a column net to a row net when pressed. Columns 1-4 and rows 5-8 are brought out to header J1, labeled pins 1 through 8 on the silkscreen, so the entire matrix can be scanned by a host microcontroller using a standard row/column GPIO scanning routine with no additional external components required on this board.
Four non-plated mounting holes (H1-H4) are placed at the corners of the board for mechanical mounting into an enclosure.
The board is a 2-layer design. Routing uses both front and back copper layers to connect the 16 switch footprints back to the 8-pin header without vias on the switch pads themselves, keeping the top layer clear under each keycap. Four plated mounting holes are located at the board corners.
3D Render
Pin assignments below are derived from the schematic and PCB silkscreen. Verify against the source design files prior to integration.
J1 — Keypad Matrix Header (8-pin)
| Pin | Signal |
|---|---|
| 1 | Column 1 |
| 2 | Column 2 |
| 3 | Column 3 |
| 4 | Column 4 |
| 5 | Row 1 |
| 6 | Row 2 |
| 7 | Row 3 |
| 8 | Row 4 |
.
├── docs/
│ └── images/
│ ├── schematic.png
│ ├── pcb-layout.png
│ └── pcb-3d-render.png
├── hardware/
│ ├── kicad/ # KiCad project (.kicad_pro/.kicad_sch/.kicad_pcb kept
│ │ # together so the project opens correctly)
│ ├── gerbers/ # Fabrication-ready Gerber and drill files
│ ├── step/ # 3D board model (.step)
│ ├── library/ # Vendor symbol/footprint/3D files for KSC1131J switch
│ └── bom.csv # Bill of materials for assembly
├── archive/ # Old backups and export snapshots (not part of the design)
├── README.md
└── LICENSE
| Reference | Component | Description |
|---|---|---|
| S1-S16 | KSC1131J | SMD tactile push-button switch |
| J1 | Conn_01x08 | 8-pin single-row male header, matrix connection |
| H1-H4 | Mounting Hole | Corner mounting holes |
A machine-readable copy is available at hardware/bom.csv. Manufacturer part numbers and LCSC/Digi-Key codes should be added once sourcing is finalized.
| Revision | Date | Notes |
|---|---|---|
| 0.1 | 2026-07-29 | Initial release |
This project is released under the MIT License.
Author: Waqar
No comments yet. Be the first to ask about this board.