BrowseBoardRepo

simple_cm4_cluster

Public

@yc-lam

Download board files

Files for version 1. Pick what you came for.

KiCad projectAll 28 files, ready to open in KiCad1.3 MB
For fabricationGerbers, drill, pick-and-place and BOMGerbers and drill zip334 KBGerbers and drill zip: cluster4334 KBGerbers and drill zip: CM4_1345 KBPick and place (CSV)7.1 KBPick and place (CSV): cluster47.1 KBPick and place (CSV): CM4_15.5 KBBOM CSV1.0 KB
Schematic PDFEvery sheet, to read or print83 KB
3D modelThe board with its parts, for an enclosure (GLB)3D model (GLB)9.9 MB3D model (GLB): cluster49.9 MB3D model (GLB): CM4_113 MB
Browse all files

Share simple_cm4_cluster

Check access before sharing the link.

Who can open this board

Anyone can open this board. No sign-in is required.

https://boardrepo.com/yc-lam/simple-cm4-cluster

This link opens the latest version. Copying it does not grant additional access.

Loading…

README

simple_CM4_cluster

A simple compute module 4 cluster in a 120x120x60mm form-factor cabable of up to 7 pi.

Each pi can work alone as a 78x58mm SBC.

Ports(per pi): 4 usb2.0, usb-c OTG, PCIE, 2 micro HDMI, CSI, DSI, micro SD and headers

The last six pin on the standard 40 way header has been removed on the board, include GPIO 16,19,20,21,26 and GND

SPI, I2C, UART are not affected, a standard HAT device can still be used.

The main board is powered by +12v through barrel jack or 4/8 pin PSU power. When the pi is alone, it could be powered through USB-A or pin headers

Two space left for EEPROM on the main PCB can be left open if custom program for the RTL8370 is not required. SW2 is a restart switch of RTL8370.

Requirement: kiCad version 5.99 or above

Comments

No comments yet. Be the first to ask about this board.

Ask about this board

Sign in to BoardRepo

New here? Signing in creates your account; there is no separate sign-up.