Loading 3D model… large boards can take a moment.
This project is a battery-powered, compact, and independent Wireless Motion Sensor node designed for IoT (Internet of Things) applications.
The board reads acceleration and gyroscope data through the onboard MPU-6050 sensor and transmits it to a Wi-Fi network (MQTT, TCP/UDP, etc.) via the ESP8266 (ESP-12F) module. It features an internal Boost Converter circuit to allow operation from a single battery cell.
| Feature | Detail |
|---|---|
| Microcontroller | ESP-12F (ESP8266 Wi-Fi SoC) |
| Sensor | MPU-6050 (3-Axis Accelerometer + 3-Axis Gyroscope) |
| Power Source | 1x AA or Li-Ion Battery Cell |
| Power Management | MCP1640 Boost Converter (Generates 3.3V from 0.8V input) |
| User Interface | 1x Programmable Button, 2x Status LEDs |
| Antenna | On-board PCB antenna (Keep-out zone design applied) |
| Design Tool | KiCad EDA |
A 3D render of the final board assembly. The placement of the battery holder and the ESP module has been optimized for size.
A dual-layer (2-Layer) design. "Keep-out" areas were strictly maintained in the RF (Antenna) section to ensure signal integrity. Power planes were kept wide to minimize electrical noise during transmission.
The circuit schematic illustrating the power management stage and sensor connections.
License: MIT License
Developer: Yunus Kunduz
No comments yet. Be the first to ask about this board.