Loading files…
An analog modular synthesizer project inspired by the architecture of classic synthesizers, including those in the Moog tradition. It grew out of a personal project I worked on between 1978 and 1980; the schematics preserve that idea and have since been collected and redrawn in KiCad.
The repository contains the project's electronic design documentation: a hierarchical top-level schematic, individual module schematics, a PCB project, and a netlist.
| Module | Function |
|---|---|
| VCO | Voltage-controlled oscillator: generates the basic signal. |
| VCF | Voltage-controlled filter, identified in the schematic as the PAiA 4730 filter. |
| VCA | Voltage-controlled amplifier: controls the signal level. |
| ADSR | Envelope generator for shaping the sound over time. |
| LFO | Low-frequency oscillator for slow modulation. |
| Noise generator | Noise source for additional timbres and modulation. |
| Audio mixer | Combines audio sources. |
| Keyboard encoder | Schematic for a 49-key musical keyboard interface. |
The modules are organized in the main schematic
analog_synth.kicad_sch; each circuit also has its
own separate schematic. Module filenames correspond to the names in the table.
Open analog_synth.kicad_pro in KiCad to access the
project, hierarchical schematic, and PCB
analog_synth.kicad_pcb. You can also open the main
schematic file directly.
The schematics document the architecture and circuits, but the repository does not specify whether the hardware has been built or tested. Before building or powering the circuits, verify the schematics, netlist, footprints, components, and required voltages.
The project is distributed under the GNU GPL version 3; see LICENSE
for the full text.
No comments yet. Be the first to ask about this board.