Loading files…
A simple LED Key PCB designed in KiCad. The board uses a through-hole LED, a single through-hole current-limiting resistor, and a momentary switch footprint. Connection pads are clearly labeled, and the overall layout is clean and easy to assemble.
A full, BOM is available here:
https://docs.google.com/spreadsheets/d/1AzciDIwuh-wBaT5EASdSV9_-SiR-sQ5o8lEvPlcvOwY/edit?usp=sharing
| # | Reference | DNP | Part Name | Manufacturer | MPN | Qty | Footprint | Notes |
|---|---|---|---|---|---|---|---|---|
| 1 | SW1A | No | Tactile Button | Omron Electronics Inc-EMC Div | B3F-1000 | 1 | THT | — |
| 2 | BT1 | No | Battery Holder | Keystone Electronics | 1058 | 1 | SMD | Coin Cell 2032 |
| 3 | R1 | No | Resistor | Vishay Beyschlag/Draloric/BC Components | MBA0204VE1000BC100 | 1 | THT | — |
| 4 | D1 | No | LED | Kingbright | WP56BID | 1 | THT | Red |
| 5 | N/A | N/A | PCB | PCBWay | N/A | 5 | N/A | — |
The LED is powered through a single current-limiting resistor, and the momentary switch provides the primary input. External power, ground, and signal lines connect through the labeled pads.
This project is licensed under the MIT License.
No comments yet. Be the first to ask about this board.