KiCad and hardware projects using ESP32
Open ESP32 hardware projects on BoardRepo, the GitHub for hardware. View the schematic, PCB, and BOM in your browser and download the KiCad sources, BOM, and Gerbers.
Projects
I made my 4 layers board wearble with microphone, ESP32 S3. Everything works but bluetooth is broken, can anyone tell my whyyyy
Project Caribou documentation, designs, and project artifacts.
Real-time Wearable-based Cardiac Monitoring with Machine Learning
Open-source air quality monitor built around an ESP32 microcontroller, SEN55 module and custom breakout board.
Low-power CO2, temperature and humidity monitor using ESP32-C6 and E-Paper display.
multi-ASIC Bitcoin miner
This is the repository for Raspberry Pi Full Stack Upgrade Project, a course from Tech Explorations.
The 2025 Hackaday Supercon RF Communicator Badge
The Open Book: Project Reboot
An IOT device built of the raspberry pi
The source for the environmental sensors used at Kwartzlab
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S3 | | ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- |
Want to send measurements back to a server through HTTP or MQTT? This is about it along with the PCB design, 3D box and support for data storage with maticas API
using ESP32C3 chip to collect and analyze air quality data
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors. Add a speaker and microphone and you have the kitchen sink too! Click the link below to configure a new device.
Saul Sanchez Abreu 20211867
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
A retrofit board with an esp32 for a gameboy color case
Upgrade of Juwei17 Astronomy Mount
I'm presenting my project of a Field Weather Station containing anemometers and wind direction sensors, also ambient temp. and humidity sensors with a UHF transmitter in the field and an at home reciever. This also includes an RPi4 B that is recieving satellite images and displaying them in a mobile phone app.
Schematic, PCB files, firmware and 3d models for creating the IoT12 solder iron temperature controller for T12 compatible tips.
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.
Open-source hardware & software for a smart wireless sensor that measures solar irradiance.
No description.
It's a custom computer for indoor bikes to measure cadence, speed and power, store sessions, visualise ongoing statistics and replace non chargeable solutions
Open source Vaporizer KiCad schematics (requires DIY PCB layout, would love it if someone contributed a laid out PCB but there's no expectation of that here!)
An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!
No description.
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.
SI4684 ESP32 DAB Receiver
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
Motor driver PCB
Try to build an ESP32 firmware with LVGL and ST7789 drivers inside.
Solder Reflow Plate PCB
No description.
This project is a compact, low-power smart plant monitoring system designed using KiCAD. It integrates an ESP32-C3-WROOM microcontroller with a range of sensors and peripheral interfaces to monitor soil moisture, temperature, and humidity. The system is ideal for IoT-based plant care, home automation, or educational prototyping.
Generate Hardware - BaselineTech Fall 2024
Universal Zigbee Sensor Board (ESP32-H2-Supermini): A KiCad 9.0 project for a versatile, low-power sensor platform using the ESP32-H2-Supermini, designed for easy integration of various sensors in IoT applications.
No description.
a compact PCB designed to integrate a CO2 sensor into a USB stick form factor
Air quality sensor (CO2, VOC, NOx, T and RH)
University Project, Compact Desktop Air Quality Monitor. Hardware+Firmware+Software
A miniature USB CO2 sensor
No description.
An Indoor Air Quality Monitor Powered by ESP32, SCD40, and SEN54
Solar powered Weather Station using an ESP32-C3
No description.
No description.
No description.
kicad for peep hw platform
Ablage für den Anhang meiner Bachelorarbeit im Studiengang Elektronik der FH Technikum Wien
Air quality zigbee sensor
No description.
No description.
The next iteration of my sensor project
An open-source and open-hardware thermostatic radiator valve based on the ESP32C6 and the 28BYJ-48 stepper motor.
This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.
# Air Quality Station
A weather station project based on the BME280 sensor with live database updates and a web ui.
Applied IoT project voor luchtkwaliteitsmetingen in Hobokense Polder