SATABAL01 is a passive RF balun module designed to interface high-speed differential pairs used in SATA data lines with unbalanced coaxial transmission lines. This module is primarily intended for applications requiring measurement, testing, or signal routing of SATA signals over RF-grade coaxial cables.
Features
Converts differential SATA signals to unbalanced RF signals and vice versa
Suitable for signal bandwidths from 4.5 MHz to 3000 MHz
Dual-channel design for full SATA differential pair
Compact design suitable for integration into test setups or embedded systems
Functional Description
The module contains two identical wideband RF balun transformers (Mini-Circuits TC1-1-13MX+), each used to convert one differential signal pair to a single-ended signal. The SATA connector (J1) provides two differential pairs. Each pair is routed through a balun (T1, T2), with the single-ended outputs available at connectors J3 and J2 respectively. These connectors support either MCX or SMA types depending on user preference.
Electrical Specifications (Per Channel)
Based on the TC1-1-13MX+ balun:
Impedance Ratio: 1:1
Frequency Range: 4.5 MHz to 3000 MHz
Insertion Loss:
4.5–1000 MHz: typ. 1.0 dB
1000–2000 MHz: typ. 2.0 dB
2000–3000 MHz: typ. 3.0 dB
Amplitude Unbalance: typ. 0.5 dB (up to 2000 MHz)
Phase Unbalance: typ. 2–3 degrees (up to 2000 MHz)
Refer to the TC1-1-13MX+ datasheet for detailed transformer characteristics【7†source】.
Schematic Overview
J1: SATA 7-pin connector (AMP 67491-1030)
T1, T2: Mini-Circuits TC1-1-13MX+ transformers for each differential pair
No comments yet. Be the first to ask about this board.