Imported from GitHub: motionlayer/CANine · commit 1660b58 · license MIT

Description

Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter

README

CANine CAN Adapter

This is a USB Type-C <-> CAN Bus adapter. Itself it is an adaptation of the CANable board. It features a 2.54mm screw terminal, a 4-pin JST-GH connector, and a 2.54mm header. In addition, it features a convenient DIP switch for setting CAN termination resistor and boot mode.

This design is released under the original CANable license.

This directory also includes an STL model for a compact 3D printable case.

There is also an alternative case design for the legacy CANine by ThotAlion.