Hardware projects tagged can-bus
Open hardware projects tagged can-bus on BoardRepo. View schematics and PCBs in the browser and download the sources.
Projects
Jetsonのヘッダーに取り付けてCANトランシーバーやデバッグ用USBポートを搭載する基板
Open-source Dual CAN FD and LIN shield for Teensy 4.1
A home weather station with internet connectivity
generic NMEA0183 to N2K gateway
12V battery monitoring
Open-source OBD-II simulator board: emulates a vehicle ECU per SAE J1979 and ISO 15031-5 over CAN. ESP32-S3 + MCP2515, 21 simulated parameters, DTC bank with MIL.
Boardoza ATA6561 is a 5 Mbps high-speed CAN FD transceiver breakout board with selectable logic level and onboard termination.
A KiCad project for a hardware module designed to interface with flap and speed sensors
canbus-connected marine autopilot
PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs
Embedded code and PCB for CAN FD to USB converter
PCB board with camera and ethernet connection + CAN-bus
A breakout board that enables USB or SPI to CAN communication using the MCP2515.
Raspberry Pi Pico Home Automation using CAN Bus
canbus_solar_mppt
Collection of various PCB designs and Firmware for prototyping projects
Motor driver PCB
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
GNSS positioning module providing location and timing data over CAN bus
Reed switch sensor module for monitoring cabinet and door states over CAN bus
Kicad project for a raspberry pi hat. Monitors push button and turns on/off power. 8 channels of ADC available and some connectors for other peripherals. Onboard CAN device and transceiver connected to the raspberry pi
Environmental monitoring module with temperature, humidity, and air quality sensors over CAN bus
A compact Arduino Nano shield with MCP2515 & TJA1051/3 for easy CAN bus integration. Work-in-progress.
Sketch for a Switchboard talking the CAN CS2 protocol based on the ESP32 NodeMCU-Board
STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, CAN-bus + Alarm etc.
CAN adapter to UART
A ESP32 based interface between CAN-bus and IoT environments.
Hardware and software for an opencpn-based chartplotter
This project visualizes CAN bus messages using an ESP32-S3 microcontroller. Key features include real-time plotting, logging to an SQLite database, and open-source design and firmware for easy hardware manufacturing.
CANDrive is a brushed DC Motor Controller controlled via a CAN interface.
Firmware, schematic and board drawings for the CANine USBC↔︎CAN adapter
Embeddster is a platform for the 25.27 - Sistemas Embebidos course at ITBA (Instituto Tecnológico de Buenos Aires), using an ESP32 to test and assist with TPs. It connects to TP hardware via a custom PCB and interfaces with a PC GUI for testing, development, and evaluation.
An Edgeberry Hardware Cartridge with a CAN-bus interface and USB console access
The boardcomputer reinvented!
Measuring Flow
General purpose radar PCB based around the IWRL6432AOP radar chip made by TI