Loading files…
Front Back
SBK_RP1 is a compact, reusable hardware module that protects low-voltage DC electronic circuits against accidental reverse battery connections. Using a P-channel MOSFET ideal-diode topology, it provides reverse polarity protection with a much lower voltage drop than a conventional series diode. An integrated LED indicates when protected output power is available.
Designed for breadboards, prototypes, and educational projects, SBK_RP1 offers a simple way to improve the robustness and reliability of battery-powered embedded systems.
| Pin | Description |
|---|---|
| VIN | Power input (2–12 VDC) |
| GND | Ground |
| VOUT | Protected power output |
Battery
│
SBK_RP1
│
SBK_SP1 (optional)
│
Embedded System
SBK_RP1 is installed between the power source and the electronic circuit. During normal operation it introduces only a very small voltage drop. If the supply is accidentally connected in reverse, the module automatically blocks current, protecting the downstream electronics.
This project is fully open-source hardware. You can:
If you prefer a ready-to-use module, fully assembled SBK_SP1 boards may be available in small batches on demand.
For availability, pricing, or quantity inquiries, contact:
These modules are intended for hobbyists, educators, prototypes, and small-scale projects. Availability depends on component stock and production capacity.
Suggestions, bug reports, and improvements are welcome.
To report a problem or suggest an improvement, open an Issue. Pull Requests are also welcome for corrections, documentation improvements, and design changes that make the project easier to understand or build.
If this project is useful for learning, teaching, or prototyping, you can support its continued development.
Donations help fund prototype hardware, documentation, educational resources, and future open-source projects.
Thank you for supporting open-source educational hardware.
This project is released as open-source hardware under the CERN Open Hardware Licence Version 2 - Permissive (CERN-OHL-P v2).
You are free to study, modify, manufacture, and distribute this design, provided the terms of the license are respected.
See the LICENSE file for the full license text.
This project was designed using KiCad 10.
No comments yet. Be the first to ask about this board.