Loading files…
A compact two-layer transformerless power supply designed in KiCad. The circuit uses a capacitive dropper, full-wave bridge rectifier, zener protection, filtering, and an LM7805 linear regulator to produce a regulated 5V DC output.
The circuit accepts an AC input through a screw terminal and uses a capacitive dropper network to limit the input current before rectification. A four-diode bridge rectifier converts the AC waveform into pulsating DC, which is then filtered using electrolytic and ceramic capacitors.
Zener diodes provide voltage protection on the rectified supply, while an LM7805 regulator provides a regulated 5V output. An LED with a current-limiting resistor indicates the presence of the output supply.
⚠️ Safety Warning: This is a transformerless power-supply topology and does not provide galvanic isolation between the input and output. The circuit can therefore present a serious electric-shock hazard when connected to hazardous AC sources.
This project is intended for educational and PCB-design purposes. It should not be connected to mains power or used in a practical application without appropriate electrical safety engineering, isolation, protection, enclosure, and applicable regulatory compliance.
This project is licensed under the MIT License.
See the LICENSE file for details.
Srushti D Hebbar GitHub
No comments yet. Be the first to ask about this board.